Vadim » 03 фев 2011, 13:41
Доброго дня! Новичок в Линуксе, поэтому сильно не пинайте.
Скачал образ кассы (12 мб), установил на Убунту 10.10 по вышеуказанной инструкции.
Загружается и вроде как бы работает - в графическом режиме ошибок не выдает,
однако справочник товаров не подгружает.
В /var/Exchange логов не пишет. Флаг good.flz не исчезает....
Если запустить Решку в терминале - выдает:
kassir@kassir:~$ reshka
--------AUTHORIZATION-------
WARNING: password file "/home/kassir/.pgpass" has group or world access; permissions should be u=rw (0600) or less
dancy_pgsqllib[2075]: ERROR Cannot open configuration file /tmp/dancy/postgres_log/lin_cash.log
dancy_pgsqllib[2075]: ERROR Cannot open configuration file /tmp/dancy/postgres_log/lin_cash.log
WARNING: password file "/home/kassir/.pgpass" has group or world access; permissions should be u=rw (0600) or less
WARNING: password file "/home/kassir/.pgpass" has group or world access; permissions should be u=rw (0600) or less
dancy_pgsqllib[2075]: ERROR Cannot open configuration file /tmp/dancy/postgres_log/lin_cash.log
dancy_pgsqllib[2075]: ERROR Cannot open configuration file /tmp/dancy/postgres_log/lin_cash.log
WARNING: password file "/home/kassir/.pgpass" has group or world access; permissions should be u=rw (0600) or less
dancy_pgsqllib[2075]: ERROR Cannot open configuration file /tmp/dancy/postgres_log/lin_cash.log
dancy_pgsqllib[2075]: ERROR Cannot open configuration file /tmp/dancy/postgres_log/lin_cash.log
WARNING: password file "/home/kassir/.pgpass" has group or world access; permissions should be u=rw (0600) or less
dancy_pgsqllib[2075]: ERROR Cannot open configuration file /tmp/dancy/postgres_log/transactions.log
dancy_pgsqllib[2075]: ERROR Cannot open configuration file /tmp/dancy/postgres_log/transactions.log
`````````````````````````````````````````````````
RESHKA MAIN PROCESS ID - 2075
VERSION: ДЭНСИ:КАССА 1.2.5 patch5
`````````````````````````````````````````````````
USBDRV::USBDRV()
can't read value IpAddress use as default 127.0.0.1
can't read value IpPort use as default 5557
``````````````````````````
SYSTEM SETUP: was init 91 parameters
``````````````````````````
BCS type = 2
MCR type = 0
Откуда начинать копать?