Запустил setup_dnc_kassa под рутом. now "Can't open port"

[Altez]

Дисплей покупателя не может открыть порт иначе как под рутом(acm1). ККМ вовсе не отвечает (com1). Как вернуть?

[Altez]

Почему так вышло? Обновил мандриву до 2010.2 - оборудование определилось-красота. Но диск монтируется в /media/CDROM, а установочный скрипт заточен под /media/cdrom. скопировал CDROM в cdrom под рутом и после этого kassir уже не имел туда доступа. Конечно надо было разобраться в правах на папки.. но было некогда. Теперь кратчайший путь переустанавливать ось?

[Alexander]

Если надо кассиру дать права на порты - включите пользователя kassir в группу dialout (можно через управление пользователями в mandriva Control Center)

[Altez]

этим не решилось. какие ещё могут быть прослойки между кассиром и юсб<>ком-портом?

Код: Выделить всё

--------AUTHORIZATION-------
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
error # 209 Result is empty
--------AUTHORIZATION-------
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
can't read value IpAddress use as default 127.0.0.1
USBDRV::USBDRV()
can't read value IpPort use as default 5557
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
error # 209 Result is empty
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
trying config file: /home/kassir/.dnc/Trans_db.conf
file not found. trying config file: /etc/dancy/Trans_db.conf
start of RMK's main function..
resolution_width = 1024
resolution_heigth = 768
``````````````````````````
SYSTEM SETUP: was init 91 parameters
``````````````````````````
CheckKkmDevice
CheckParamDevice
init_kkm
PortNumber == 0
CheckKkmDevice
CheckParamDevice
CheckKkmDevice
CheckParamDevice
CheckKkmDevice
CheckParamDevice
CheckKkmDevice
CheckParamDevice
CheckKkmDevice
CheckParamDevice
````````````````````````````
Session is opened
````````````````````````````
picture_width = 89, picture_height = 73
RegistrationForm::showEvent
RegistrationForm::enterEvent ( QEvent * ) 
------reg key press------
c_key = 4155
c_ascii = 0
c_state = 0
c_text = 
c_text len = 0
------------
D I S P L A Y ---  STOPED  --- D I S P L A Y
PortFileDescr MCRDRV = 0
end void MCRDRV::stop()
--------AUTHORIZATION-------
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
can't read value IpAddress use as default 127.0.0.1
USBDRV::USBDRV()
can't read value IpPort use as default 5557
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
error # 209 Result is empty
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
trying config file: /home/kassir/.dnc/Trans_db.conf
file not found. trying config file: /etc/dancy/Trans_db.conf
start of RMK's main function..
resolution_width = 1024
resolution_heigth = 768
``````````````````````````
SYSTEM SETUP: was init 91 parameters
``````````````````````````
CheckKkmDevice
CheckParamDevice
init_kkm
PortNumber == 0
CheckKkmDevice
CheckParamDevice
CheckKkmDevice
CheckParamDevice
CheckKkmDevice
CheckParamDevice
CheckKkmDevice
CheckParamDevice
CheckKkmDevice
CheckParamDevice
````````````````````````````
Session is opened
````````````````````````````
picture_width = 89, picture_height = 73
RegistrationForm::showEvent
RegistrationForm::enterEvent ( QEvent * ) 
------reg key press------
c_key = 4155
c_ascii = 0
c_state = 0
c_text = 
c_text len = 0
------------
D I S P L A Y ---  STOPED  --- D I S P L A Y
PortFileDescr MCRDRV = 0
end void MCRDRV::stop()
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
error # 209 Result is empty
can't read value IpAddress use as default 127.0.0.1
USBDRV::USBDRV()
can't read value IpPort use as default 5557
D I S P L A Y ---  STOPED  --- D I S P L A Y
D I S P L A Y ---  STOPED  --- D I S P L A Y
PortFileDescr MCRDRV = 0
end void MCRDRV::stop()
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
trying config file: /home/kassir/.dnc/LinCash_db.conf
file not found. trying config file: /etc/dancy/LinCash_db.conf
trying config file: /home/kassir/.dnc/Trans_db.conf
file not found. trying config file: /etc/dancy/Trans_db.conf
`````````````````````````````````````````````````
RESHKA MAIN PROCESS ID - 2898
VERSION: ДЭНСИ:КАССА 1.2.6
`````````````````````````````````````````````````
can't read value IpAddress use as default 127.0.0.1
can't read value IpPort use as default 5557
USBDRV::USBDRV()
``````````````````````````
SYSTEM SETUP: was init 91 parameters
``````````````````````````
BCS type = 0
MCR type = 0
PasswordAuthorization()
Authorization ----- ok
Администратор
------Main Menu------
--------lincash-------
D I S P L A Y ---  STOPED  --- D I S P L A Y
PortFileDescr MCRDRV = 0
end void MCRDRV::stop()
can't read value IpAddress use as default 127.0.0.1
USBDRV::USBDRV()
can't read value IpPort use as default 5557
------Main Menu------
--------lincash-------
D I S P L A Y ---  STOPED  --- D I S P L A Y
PortFileDescr MCRDRV = 0
end void MCRDRV::stop()
can't read value IpAddress use as default 127.0.0.1
USBDRV::USBDRV()
can't read value IpPort use as default 5557
------Main Menu------
--------devicesetup-------
D I S P L A Y ---  STOPED  --- D I S P L A Y
PortFileDescr MCRDRV = 0
end void MCRDRV::stop()
USBDRV::USBDRV()
can't read value IpAddress use as default 127.0.0.1
can't read value IpPort use as default 5557
BCS type = 0
MCR type = 0
------Main Menu------
------Close------
D I S P L A Y ---  STOPED  --- D I S P L A Y
PortFileDescr MCRDRV = 0
end void MCRDRV::stop()
END OF RESHKA

[Altez]

"обновился из исо" от имени кассира до 126патч1-дуля исчезла.
просьба к властителям проекта добавить анинстал, ибо та же версия не накатится при подобных обстоятельствах